Telefónica’s corporate venture capital arm, Wayra, has announced its investment in AI answer engine Perplexity. Perplexity’s AI-driven platform aims to revolutionise internet information searches by providing real-time, accurate, and contextual answers to queries using natural language processing. Unlike traditional search engines that return a list of…
Model reveals why debunking election misinformation often doesn’t work
When an election result is disputed, people who are skeptical about the outcome may be swayed by figures of authority who come down on one side or the other. Those figures can be independent monitors, political figures, or news organizations. However, these “debunking” efforts don’t always have the desired effect, and in some cases, they can lead people to cling more tightly to their original position.
Neuroscientists and political scientists at MIT and the University of California at Berkeley have now created a computational model that analyzes the factors that help to determine whether debunking efforts will persuade people to change their beliefs about the legitimacy of an election. Their findings suggest that while debunking fails much of the time, it can be successful under the right conditions.
For instance, the model showed that successful debunking is more likely if people are less certain of their original beliefs and if they believe the authority is unbiased or strongly motivated by a desire for accuracy. It also helps when an authority comes out in support of a result that goes against a bias they are perceived to hold: for example, Fox News declaring that Joseph R. Biden had won in Arizona in the 2020 U.S. presidential election.
“When people see an act of debunking, they treat it as a human action and understand it the way they understand human actions — that is, as something somebody did for their own reasons,” says Rebecca Saxe, the John W. Jarve Professor of Brain and Cognitive Sciences, a member of MIT’s McGovern Institute for Brain Research, and the senior author of the study. “We’ve used a very simple, general model of how people understand other people’s actions, and found that that’s all you need to describe this complex phenomenon.”
The findings could have implications as the United States prepares for the presidential election taking place on Nov. 5, as they help to reveal the conditions that would be most likely to result in people accepting the election outcome.
MIT graduate student Setayesh Radkani is the lead author of the paper, which appears today in a special election-themed issue of the journal PNAS Nexus. Marika Landau-Wells PhD ’18, a former MIT postdoc who is now an assistant professor of political science at the University of California at Berkeley, is also an author of the study.
Modeling motivation
In their work on election debunking, the MIT team took a novel approach, building on Saxe’s extensive work studying “theory of mind” — how people think about the thoughts and motivations of other people.
As part of her PhD thesis, Radkani has been developing a computational model of the cognitive processes that occur when people see others being punished by an authority. Not everyone interprets punitive actions the same way, depending on their previous beliefs about the action and the authority. Some may see the authority as acting legitimately to punish an act that was wrong, while others may see an authority overreaching to issue an unjust punishment.
Last year, after participating in an MIT workshop on the topic of polarization in societies, Saxe and Radkani had the idea to apply the model to how people react to an authority attempting to sway their political beliefs. They enlisted Landau-Wells, who received her PhD in political science before working as a postdoc in Saxe’s lab, to join their effort, and Landau suggested applying the model to debunking of beliefs regarding the legitimacy of an election result.
The computational model created by Radkani is based on Bayesian inference, which allows the model to continually update its predictions of people’s beliefs as they receive new information. This approach treats debunking as an action that a person undertakes for his or her own reasons. People who observe the authority’s statement then make their own interpretation of why the person said what they did. Based on that interpretation, people may or may not change their own beliefs about the election result.
Additionally, the model does not assume that any beliefs are necessarily incorrect or that any group of people is acting irrationally.
“The only assumption that we made is that there are two groups in the society that differ in their perspectives about a topic: One of them thinks that the election was stolen and the other group doesn’t,” Radkani says. “Other than that, these groups are similar. They share their beliefs about the authority — what the different motives of the authority are and how motivated the authority is by each of those motives.”
The researchers modeled more than 200 different scenarios in which an authority attempts to debunk a belief held by one group regarding the validity of an election outcome.
Each time they ran the model, the researchers altered the certainty levels of each group’s original beliefs, and they also varied the groups’ perceptions of the motivations of the authority. In some cases, groups believed the authority was motivated by promoting accuracy, and in others they did not. The researchers also altered the groups’ perceptions of whether the authority was biased toward a particular viewpoint, and how strongly the groups believed in those perceptions.
Building consensus
In each scenario, the researchers used the model to predict how each group would respond to a series of five statements made by an authority trying to convince them that the election had been legitimate. The researchers found that in most of the scenarios they looked at, beliefs remained polarized and in some cases became even further polarized. This polarization could also extend to new topics unrelated to the original context of the election, the researchers found.
However, under some circumstances, the debunking was successful, and beliefs converged on an accepted outcome. This was more likely to happen when people were initially more uncertain about their original beliefs.
“When people are very, very certain, they become hard to move. So, in essence, a lot of this authority debunking doesn’t matter,” Landau-Wells says. “However, there are a lot of people who are in this uncertain band. They have doubts, but they don’t have firm beliefs. One of the lessons from this paper is that we’re in a space where the model says you can affect people’s beliefs and move them towards true things.”
Another factor that can lead to belief convergence is if people believe that the authority is unbiased and highly motivated by accuracy. Even more persuasive is when an authority makes a claim that goes against their perceived bias — for instance, Republican governors stating that elections in their states had been fair even though the Democratic candidate won.
As the 2024 presidential election approaches, grassroots efforts have been made to train nonpartisan election observers who can vouch for whether an election was legitimate. These types of organizations may be well-positioned to help sway people who might have doubts about the election’s legitimacy, the researchers say.
“They’re trying to train to people to be independent, unbiased, and committed to the truth of the outcome more than anything else. Those are the types of entities that you want. We want them to succeed in being seen as independent. We want them to succeed as being seen as truthful, because in this space of uncertainty, those are the voices that can move people toward an accurate outcome,” Landau-Wells says.
The research was funded, in part, by the Patrick J. McGovern Foundation and the Guggenheim Foundation.
Innovative machine learning uses transforming business applications – AI News
Machine learning (ML) is revolutionising the way businesses operate, driving innovation, and unlocking new possibilities across industries. By leveraging vast amounts of data and powerful algorithms, ML enables companies to automate processes, make accurate predictions, and uncover hidden patterns to optimise performance. From personalised customer experiences…
MIT team takes a major step toward fully 3D-printed active electronics
Active electronics — components that can control electrical signals — usually contain semiconductor devices that receive, store, and process information. These components, which must be made in a clean room, require advanced fabrication technology that is not widely available outside a few specialized manufacturing centers.
During the Covid-19 pandemic, the lack of widespread semiconductor fabrication facilities was one cause of a worldwide electronics shortage, which drove up costs for consumers and had implications in everything from economic growth to national defense. The ability to 3D print an entire, active electronic device without the need for semiconductors could bring electronics fabrication to businesses, labs, and homes across the globe.
While this idea is still far off, MIT researchers have taken an important step in that direction by demonstrating fully 3D-printed resettable fuses, which are key components of active electronics that usually require semiconductors.
The researchers’ semiconductor-free devices, which they produced using standard 3D printing hardware and an inexpensive, biodegradable material, can perform the same switching functions as the semiconductor-based transistors used for processing operations in active electronics.
Although still far from achieving the performance of semiconductor transistors, the 3D-printed devices could be used for basic control operations like regulating the speed of an electric motor.
“This technology has real legs. While we cannot compete with silicon as a semiconductor, our idea is not to necessarily replace what is existing, but to push 3D printing technology into uncharted territory. In a nutshell, this is really about democratizing technology. This could allow anyone to create smart hardware far from traditional manufacturing centers,” says Luis Fernando Velásquez-García, a principal research scientist in MIT’s Microsystems Technology Laboratories (MTL) and senior author of a paper describing the devices, which appears in Virtual and Physical Prototyping.
He is joined on the paper by lead author Jorge Cañada, an electrical engineering and computer science graduate student.
An unexpected project
Semiconductors, including silicon, are materials with electrical properties that can be tailored by adding certain impurities. A silicon device can have conductive and insulating regions, depending on how it is engineered. These properties make silicon ideal for producing transistors, which are a basic building block of modern electronics.
However, the researchers didn’t set out to 3D-print semiconductor-free devices that could behave like silicon-based transistors.
This project grew out of another in which they were fabricating magnetic coils using extrusion printing, a process where the printer melts filament and squirts material through a nozzle, fabricating an object layer-by-layer.
They saw an interesting phenomenon in the material they were using, a polymer filament doped with copper nanoparticles.
If they passed a large amount of electric current into the material, it would exhibit a huge spike in resistance but would return to its original level shortly after the current flow stopped.
This property enables engineers to make transistors that can operate as switches, something that is typically only associated with silicon and other semiconductors. Transistors, which switch on and off to process binary data, are used to form logic gates which perform computation.
“We saw that this was something that could help take 3D printing hardware to the next level. It offers a clear way to provide some degree of ‘smart’ to an electronic device,” Velásquez-García says.
The researchers tried to replicate the same phenomenon with other 3D printing filaments, testing polymers doped with carbon, carbon nanotubes, and graphene. In the end, they could not find another printable material that could function as a resettable fuse.
They hypothesize that the copper particles in the material spread out when it is heated by the electric current, which causes a spike in resistance that comes back down when the material cools and the copper particles move closer together. They also think the polymer base of the material changes from crystalline to amorphous when heated, then returns to crystalline when cooled down — a phenomenon known as the polymeric positive temperature coefficient.
“For now, that is our best explanation, but that is not the full answer because that doesn’t explain why it only happened in this combination of materials. We need to do more research, but there is no doubt that this phenomenon is real,” he says.
3D-printing active electronics
The team leveraged the phenomenon to print switches in a single step that could be used to form semiconductor-free logic gates.
The devices are made from thin, 3D-printed traces of the copper-doped polymer. They contain intersecting conductive regions that enable the researchers to regulate the resistance by controlling the voltage fed into the switch.
While the devices did not perform as well as silicon-based transistors, they could be used for simpler control and processing functions, such as turning a motor on and off. Their experiments showed that, even after 4,000 cycles of switching, the devices showed no signs of deterioration.
But there are limits to how small the researchers can make the switches, based on the physics of extrusion printing and the properties of the material. They could print devices that were a few hundred microns, but transistors in state-of-the-art electronics are only few nanometers in diameter.
“The reality is that there are many engineering situations that don’t require the best chips. At the end of the day, all you care about is whether your device can do the task. This technology is able to satisfy a constraint like that,” he says.
However, unlike semiconductor fabrication, their technique uses a biodegradable material and the process uses less energy and produces less waste. The polymer filament could also be doped with other materials, like magnetic microparticles that could enable additional functionalities.
In the future, the researchers want to use this technology to print fully functional electronics. They are striving to fabricate a working magnetic motor using only extrusion 3D printing. They also want to finetune the process so they could build more complex circuits and see how far they can push the performance of these devices.
“This paper demonstrates that active electronic devices can be made using extruded polymeric conductive materials. This technology enables electronics to be built into 3D printed structures. An intriguing application is on-demand 3D printing of mechatronics on board spacecraft,” says Roger Howe, the William E. Ayer Professor of Engineering, Emeritus, at Stanford University, who was not involved with this work.
This work is funded, in part, by Empiriko Corporation.
Skip Levens, Marketing Director, Media & Entertainment, Quantum – Interview Series
Skip Levens is a product leader and AI strategist at Quantum, a leader in data management solutions for AI and unstructured data. He is currently responsible for driving engagement, awareness, and growth for Quantum’s end-to-end solutions. Throughout his career – which has included stops at organizations like Apple, Backblaze, Symply, and Active…
Google Imagen 3 vs. The Competition: A New Benchmark in Text-to-Image Models
Artificial Intelligence (AI) is transforming the way we create visuals. Text-to-image models make it incredibly easy to generate high-quality images from simple text descriptions. Industries like advertising, entertainment, art, and design already employ these models to explore new creative possibilities. As technology continues to evolve, the…
A Call to Moderate Anthropomorphism in AI Platforms
OPINION Nobody in the fictional Star Wars universe takes AI seriously. In the historic human timeline of George Lucas’s 47 year-old science-fantasy franchise, threats from singularities and machine learning consciousness are absent, and AI is confined to autonomous mobile robots (‘droids’) – which are habitually dismissed…
Real-time data, blockchain, and AI: A game-changer for intelligent apps – AI News
When we talk about real-time data, what we refer to is information that becomes available as soon as it’s created and acquired. Rather than being stored, data is forwarded directly to an application as soon as it’s collected and is made immediately available – without any…