Cyberbiosecurity 101: protecting life sciences in the digital age – CyberTalk

Cyberbiosecurity 101: protecting life sciences in the digital age – CyberTalk

EXECUTIVE SUMMARY:

In May of 2017, the life sciences industry contended with the WannaCry campaign, one of the most widespread and destructive cyber attacks in history. It rapidly propagated across networks, encrypting data and systems; leaving organizations crippled and desperate.

Some life sciences groups permanently lost intellectual property or data. Others were forced to halt production of certain drugs and vaccines. The combination of costly system downtime and ransom demands left a few enterprises financially insolvent.

Why life sciences?
Cyber criminals perceive life sciences as an attractive target due to the intellectual property available on computer systems. Ninety-five percent of all cyber attacks in the life sciences sector center around intellectual property (IP).

For the life science sector, WannaCry served as a cyber security wake-up call. However, not every organization took adequate action and the threat landscape has grown more perilous in the years since.

Here’s what to know about preventing and defending against cyberbiosecurity threats:

Addressing the challenge

First, know where the problems are. Conduct a thorough risk assessment – one that’s specific to your organization’s unique network environment. Identify critical assets, including intellectual property, research data and other proprietary information. Implement layered defenses to mitigate risks. These include firewalls, intrusion detection systems and endpoint detection systems.

But that alone isn’t enough. Be sure to train your employees effectively. Provide education around cyber threats, including social engineering. Develop a cyber security-conscious culture, where everyone understands the importance of safeguarding information. Provide regular supplemental training to address evolving threats.

Beyond that, ensure that your organization’s software developers use secure coding practices. Regularly patch and update software to address vulnerabilities.

Develop and test incident response (IR) plans that are specific to cyberbiosecurity/incidents in the life sciences sector. As goes for any IR plans, establish communication channels, delegate roles and clarify responsibilities, all of which will hasten the response in the event of a breach. Practice tabletop exercises to simulate real-world scenarios.

Leverage threat intelligence and information sharing efforts. Participate in Information Sharing and Analysis Centers (ISACs) or working groups that are focused on cyberbiosecurity. This will enable your organization to learn from peers and to exchange tactics. Your organization may also wish to collaborate on joint prevention and defense initiatives.

Cyber and physical system integration

Another aspect of the cyberbiosecurity situation to consider is reliance on cyber-physical systems. These types of systems integrate cyber-based control mechanisms into physical infrastructure. Examples include building automation systems and certain types of data collection and analysis instruments.

To protect these systems, ensure that your organization limits physical access to critical infrastructure and the toggles that control infrastructure functions. In addition, consider installing surveillance cameras and monitor access points.

Further, ahead of acquiring new cyber-physical technology, assess the security practices of the vendors who are providing the equipment. Ensure that vendors follow cyber security best practices.

More recommendations for CISOs

Have you completed all of the aforementioned recommendations? Great work! Take the next step: thoroughly test for vulnerabilities. Based on the results of the testing, devise and implement a remediation strategy. This will significantly minimize cyber risk. If you’re looking for experts with deep knowledge concerning how to resolve cyber security gaps, click here.

Closing thoughts

The life sciences community has an opportunity (and perhaps, an obligation) to lead when it comes to securing digital resources. Investing in cyberbiosecurity ensures the secure future of scientific research, life-saving vaccines, and life-changing pharmaceutical treatments.

For more insights like this, please see CyberTalk.org’s past coverage. Lastly, subscribe to the CyberTalk.org newsletter for timely insights, cutting-edge analyses and more, delivered straight to your inbox each week.

The Friday Roundup – Video Camera Settings & A YouTube Setup

Important Camera Settings For Videography If you are shooting video with a reasonably good camera or with a smartphone App offering access to advanced settings, then this video is well worth taking a look at. These days both of those choices are going to give you…

For MIT students, there is much to learn from crafting a chair

Design spans disciplines and schools at MIT as a versatile mode of inquiry. Whether software, furniture, robots, or consumer products, design classes at MIT guide students through the iterative process of ideation, planning, and prototyping.

“Design is 80 percent problem-setting and 20 percent problem-solving,” says MIT Professor Larry Sass SM ’94, PhD ’00, designer and researcher in the Department of Architecture. In many MIT classes, “problem-setting” typically brings to mind a weekly sheet of exercises calling for a mathematical proof or circled answer. But in design courses, problem-setting refers to the process of defining the needs and functions to be addressed with an effective solution.

Sass is the designer and instructor of class 4.500 (Design Computation), a course centering the role of computational tools like 3D modeling, rendering, and animation in design. As a course in the Department of Architecture, 4.500 focuses on the creation and experience of an object in the built environment — in this case, the chair.

Chairs are a powerful pedagogical tool posing a challenging, scoped, and specific exercise for new designers. They have a particular and intuitive function addressing the universal need to rest and take countless shapes encouraging a variety of experiences, whether a short break or a lengthy lounge. Designers revisit the chair as an iconic object at the intersection of aesthetics and function, making dozens of careful design decisions that inform its visual and somatic experience.

“A chair is the best product for learning design,” affirms Sass. “Learning how to design a chair is hard for designers across all scales, from the nanoscale designer of instruments to the macro-scale architect of skyscrapers,” he adds. For him, a well-designed chair is “firm, affordable, and delightful.”

For MIT students, there is much to learn from crafting a chair

“I wanted to make something with a unique form that would be challenging to recreate using traditional woodworking techniques. That meant creating unnatural, curved shapes using methods exclusive to modeling software,” says junior Frankie Schulte, whose design is seen at top right. Additional student chair designs by Hazel Mann (top left), Max Reese (bottom left), and Angelica Zhuang (bottom right).

Photos courtesy of the students.


Reinventing the chair

Insights from students who took the course during the fall 2023 term show the thoughtful and experimental process of design. The course leaves students with not only a new piece of furniture, but also new skills and reflections on design. “The best [outcome] is that the students learn about design as the creation of an experience as part of a function,” says Sass.

Students in 4.500 begin their journey by considering the experience they wanted to design for their chairs. Junior Shruthi Ravichandran designed a chair around the experience of “gentle containment,” influenced by OTO, the “hugging chair.”

“I was very inspired by the idea of creating a chair that is both rigid and flexible at the same time — by conforming to the user’s body and offering a sense of comfort and security,” says Ravichandran.

Another student, second-year Wonu Abiodun, who was previously part of the DesignPlus First-Year Learning Community, envisioned a unique lounging chair drawing from precedents of existing seats and evocative images of yoga poses. It encourages users to “sit criss-cross and lean back to stretch their spine, creating a kind of meditative pose to drain stress from a busy day,” Abiodun explains.

The geometry of a chair ties directly into its success, motivating the use of computational modeling tools. “We need to know the heights, widths, and details of our ideas to ensure comfort and safety,” says Sass. Student designers use a suite of design software including Rhino, AutoCAD, and 3D Studio Max to realize their concepts in geometry.

Sometimes, the technology itself acts as an inspiration. For junior Frankie Schulte, the digital software and computer numerical control (CNC) fabrication — a computerized process that uses software and code to control production equipment — used in the course informed his chair design choices. “I wanted to make something with a unique form that would be challenging to recreate using traditional woodworking techniques. That meant creating unnatural, curved shapes using methods exclusive to modeling software,” says Schulte.

Making it real

After producing an initial digital model of their chair, students assemble quarter-scale models out of laser-cut masonite, a sturdy engineered wood material. Creating scale models (small but exact copies) helps students identify aspects to improve in their chair designs under material and physical constraints. Finding that some pieces would break or fall apart while building scale models, Abiodun would strengthen those parts of the design before moving on to the final chair.

Though there’s a lot of digital modeling, it doesn’t stop there because there’s also the physical aspect of sanding and routing parts, fitting them together, and testing — fingers crossed — the stability of the final product, she explains. Scale models also allow for shape exploration. Ravichandran found that each scale model of hers differed significantly.

“My models ranged from a chair that was fully made up of spheres to a chair that only had flat pieces. My final model and chair ended up in what I think is a happy middle — the seat and armrests are flat for containment and comfort, and the sides evoke the sentiment of a cloud,” she says.

Once satisfied with their scale models, students produce the full-scale prototype, keeping in mind a material limit — a single half-inch thick, 4-foot by 8-foot plywood board to be cut with a CNC machine.

Having never used such equipment before, Ravichandran sought guidance from teaching assistants and made a test object. “I built a little cloud desk organizer to test out the tolerances of the machine and see how well it could navigate around tight curves and points. This was super useful, as it helped me understand how to redesign the final file so that parts fit together snugly,” she says.

Schulte’s completed chair boasts bright colors evoking a Bauhaus-style sun. The careful arrangement of concentric circular pieces forms a seat suitable for a brief rest. “My initial precedents never had comfort in mind, and the final sitting experience certainly reflected that fact,” said Schulte. The chair has found a place in his living community lounge.

Sass has taught 4.500 (Design Computation) for the past 22 years to students across the Institute. He joined MIT’s Department of Architecture faculty after earning his MS in 1994 and PhD at MIT in 2000, and 4.500 was the first course he designed as a new professor. For his long-held commitment to excellent undergraduate education, Sass was recently honored as a 2023 MacVicar Faculty Fellow, a prestigious award informed by student, colleague, and alumni letters of support.

While the course focuses on the design and fabrication of chairs, Sass emphasizes: “Everyone who completes my course can create a 3D model and prototype almost anything.”

A new way to quantify climate change impacts: “Outdoor days”

A new way to quantify climate change impacts: “Outdoor days”

For most people, reading about the difference between a global average temperature rise of 1.5 C versus 2 C doesn’t conjure up a clear image of how their daily lives will actually be affected. So, researchers at MIT have come up with a different way of measuring and describing what global climate change patterns, in specific regions around the world, will mean for people’s daily activities and their quality of life.

The new measure, called “outdoor days,” describes the number of days per year that outdoor temperatures are neither too hot nor too cold for people to go about normal outdoor activities, whether work or leisure, in reasonable comfort. Describing the impact of rising temperatures in those terms reveals some significant global disparities, the researchers say.

The findings are described in a research paper written by MIT professor of civil and environmental engineering Elfatih Eltahir and postdocs Yeon-Woo Choi and Muhammad Khalifa, and published in the Journal of Climate.

Eltahir says he got the idea for this new system during his hourlong daily walks in the Boston area. “That’s how I interface with the temperature every day,” he says. He found that there have been more winter days recently when he could walk comfortably than in past years. Originally from Sudan, he says that when he returned there for visits, the opposite was the case: In winter, the weather tends to be relatively comfortable, but the number of these clement winter days has been declining. “There are fewer days that are really suitable for outdoor activity,” Eltahir says.

Rather than predefine what constitutes an acceptable outdoor day, Eltahir and his co-authors created a website where users can set their own definition of the highest and lowest temperatures they consider comfortable for their outside activities, then click on a country within a world map, or a state within the U.S., and get a forecast of how the number of days meeting those criteria will change between now and the end of this century. The website is freely available for anyone to use.

“This is actually a new feature that’s quite innovative,” he says. “We don’t tell people what an outdoor day should be; we let the user define an outdoor day. Hence, we invite them to participate in defining how future climate change will impact their quality of life, and hopefully, this will facilitate deeper understanding of how climate change will impact individuals directly.”

After deciding that this was a way of looking at the issue of climate change that might be useful, Eltahir says, “we started looking at the data on this, and we made several discoveries that I think are pretty significant.”

First of all, there will be winners and losers, and the losers tend to be concentrated in the global south. “In the North, in a place like Russia or Canada, you gain a significant number of outdoor days. And when you go south to places like Bangladesh or Sudan, it’s bad news. You get significantly fewer outdoor days. It is very striking.”

To derive the data, the software developed by the team uses all of the available climate models, about 50 of them, and provides output showing all of those projections on a single graph to make clear the range of possibilities, as well as the average forecast.

When we think of climate change, Eltahir says, we tend to look at maps that show that virtually everywhere, temperatures will rise. “But if you think in terms of outdoor days, you see that the world is not flat. The North is gaining; the South is losing.”

While North-South disparity in exposure and vulnerability has been broadly recognized in the past, he says, this way of quantifying the effects on the hazard (change in weather patterns) helps to bring home how strong the uneven risks from climate change on quality of life will be. “When you look at places like Bangladesh, Colombia, Ivory Coast, Sudan, Indonesia — they are all losing outdoor days.”

The same kind of disparity shows up in Europe, he says. The effects are already being felt, and are showing up in travel patterns: “There is a shift to people spending time in northern European states. They go to Sweden and places like that instead of the Mediterranean, which is showing a significant drop,” he says.

Placing this kind of detailed and localized information at people’s fingertips, he says, “I think brings the issue of communication of climate change to a different level.” With this tool, instead of looking at global averages, “we are saying according to your own definition of what a pleasant day is, [this is] how climate change is going to impact you, your activities.”

And, he adds, “hopefully that will help society make decisions about what to do with this global challenge.”

The project received support from the MIT Climate Grand Challenges project and the Abdul Latif Jameel Water and Food Systems Lab.

Think globally, rebuild locally

Think globally, rebuild locally

Building construction accounts for a huge chunk of greenhouse gas emissions: About 36 percent of carbon dioxide emissions and 40 percent of energy consumption in Europe, for instance. That’s why the European Union has developed regulations about the reuse of building materials.

Some cities are adding more material reuse into construction already. Amsterdam, for example, is attempting to slash its raw material use by half by 2030. The Netherlands as a whole aims for a “circular economy” of completely reused materials by 2050.

But the best way to organize the reuse of construction waste is still being determined. For one thing: Where should reusable building materials be stored before they are reused? A newly published study focusing on Amsterdam finds the optimal material reuse system for construction has many local storage “hubs” that keep materials within a few miles of where they will be needed.

“Our findings provide a starting point for policymakers in Amsterdam to strategize land use effectively,” says Tanya Tsui, a postdoc at MIT and a co-author of the new paper. “By identifying key locations repeatedly favored across various hub scenarios, we underscore the importance of prioritizing these areas for future circular economy endeavors in Amsterdam.”

The study adds to an emerging research area that connects climate change and urban planning.

“The issue is where you put material in between demolition and new construction,” says Fábio Duarte, a principal researcher at MIT’s Senseable City Lab and a co-author of the new paper. “It will have huge impacts in terms of transportation. So you have to define the best sites. Should there be only one? Should we hold materials across a wide number of sites? Or is there an optimal number, even if it changes over time? This is what we examined in the paper.”

The paper, “Spatial optimization of circular timber hubs,” is published in NPJ Nature Urban Sustainability. The authors are Tsui, who is a postdoc at the MIT Senseable Amsterdam Lab in the Amsterdam Institute for Advanced Metropolitan Solutions (AMS); Titus Venverloo, a research fellow at MIT Senseable Amsterdam Lab and AMS; Tom Benson, a researcher at the Senseable City Lab; and Duarte, who is also a lecturer in MIT’s Department of Urban Studies and Planning and the MIT Center for Real Estate.

Numerous experts have previously studied at what scale the “circular economy” of reused materials might best operate. Some have suggested that very local circuits of materials recycling make the most sense; others have proposed that building-materials recycling will work best at a regional scale, with a radius of distribution covering 30 or more miles. Some analyses contend that global-scale reuse will be necessary to an extent.

The current study adds to this examination of the best geographic scale for using construction materials again. Currently the storage hubs that do exist for such reused materials are chosen by individual companies, but those locations might not be optimal either economically or environmentally. 

To conduct the study, the researchers essentially conducted a series of simulations of the Amsterdam metropolitan area, focused exclusively on timber reuse. The simulations examined how the system would work if anywhere from one to 135 timber storage hubs existed in greater Amsterdam. The modeling accounted for numerous variables, such as emissions reductions, logistical factors, and even how changing supply-and-demand scenarios would affect the viability of the reusehubs.

Ultimately, the research found that Amsterdam’s optimal system would have 29 timber hubs, each serving a radius of about 2 miles. That setup generated 95 percent of the maximum reduction in CO2 emissions, while retaining logistical and economic benefits.

That results also lands firmly on the side of having more localized networks for keeping construction materials in use.

“If we have demolition happening in certain sites, then we can project where the best spots around the city are to have these circular economy hubs, as we call them,” Duarte says. “It’s not only one big hub — or one hub per construction site.”

The study seeks to identify not only the optimal number of storage sites, but to identify where those sites might be.

“[We hope] our research sparks discussions regarding the location and scale of circular hubs,” Tsui says. “While much attention has been given to governance aspects of the circular economy in cities, our study demonstrates the potential of utilizing location data on materials to inform decisions in urban planning.”

The simulations also illuminated the dynamics of materials reuse. In scenarios where Amsterdam had from two to 20 timber recycling hubs, the costs involved lowered as the number of hubs increased — because having more hubs reduces transportation costs. But when the number of hubs went about 40, the system as a whole became more expensive — because each timber depot was not storing enough material to justify the land use.

As such, the results may be of interest to climate policymakers, urban planners, and business interests getting involved in implementing the circular economy in the construction industry.

“Ultimately,” Tsui says, “we envision our research catalyzing meaningful discussions and guiding policymakers toward more informed decisions in advancing the circular economy agenda in urban contexts.”

The research was supported, in part, by the European Union’s Horizon 2020 research and innovation program.

Shadi Rostami, SVP of Engineering at Amplitude – Interview Series

Shadi is SVP of Engineering at digital analytics leader Amplitude. She is a passionate, seasoned technology leader and architect experienced in building and managing highly proficient engineering teams. Prior to Amplitude, she was VP of Engineering at Palo Alto Networks. She has innovated and delivered several…

The Rise of Mixture-of-Experts for Efficient Large Language Models

In the world of natural language processing (NLP), the pursuit of building larger and more capable language models has been a driving force behind many recent advancements. However, as these models grow in size, the computational requirements for training and inference become increasingly demanding, pushing against…

Understanding the impacts of mining on local environments and communities

Hydrosocial displacement refers to the idea that resolving water conflict in one area can shift the conflict to a different area. The concept was coined by Scott Odell, a visiting researcher in MIT’s Environmental Solutions Initiative (ESI). As part of ESI’s Program on Mining and the Circular Economy, Odell researches the impacts of extractive industries on local environments and communities, especially in Latin America. He discovered that hydrosocial displacements are often in regions where the mining industry is vying for use of precious water sources that are already stressed due to climate change.

Odell is working with John Fernández, ESI director and professor in the Department of Architecture, on a project that is examining the converging impacts of climate change, mining, and agriculture in Chile. The work is funded by a seed grant from MIT’s Abdul Latif Jameel Water and Food Systems Lab (J-WAFS). Specifically, the project seeks to answer how the expansion of seawater desalination by the mining industry is affecting local populations, and how climate change and mining affect Andean glaciers and the agricultural communities dependent upon them.

By working with communities in mining areas, Odell and Fernández are gaining a sense of the burden that mining minerals needed for the clean energy transition is placing on local populations, and the types of conflicts that arise when water sources become polluted or scarce. This work is of particular importance considering over 100 countries pledged a commitment to the clean energy transition at the recent United Nations climate change conference, known as COP28.

Understanding the impacts of mining on local environments and communities

Play video

J-WAFS Community Spotlight on Scott Odell

Water, humanity’s lifeblood

At the March 2023 United Nations (U.N.) Water Conference in New York, U.N. Secretary-General António Guterres warned “water is in deep trouble. We are draining humanity’s lifeblood through vampiric overconsumption and unsustainable use and evaporating it through global heating.” A quarter of the world’s population already faces “extremely high water stress,” according to the World Resources Institute. In an effort to raise awareness of major water-related issues and inspire action for innovative solutions, the U.N. created World Water Day, observed every year on March 22. This year’s theme is “Water for Peace,” underscoring the fact that even though water is a basic human right and intrinsic to every aspect of life, it is increasingly fought over as supplies dwindle due to problems including drought, overuse, or mismanagement.  

The “Water for Peace” theme is exemplified in Fernández and Odell’s J-WAFS project, where findings are intended to inform policies to reduce social and environmental harms inflicted on mining communities and their limited water sources.

“Despite broad academic engagement with mining and climate change separately, there has been a lack of analysis of the societal implications of the interactions between mining and climate change,” says Odell. “This project is helping to fill the knowledge gap. Results will be summarized in Spanish and English and distributed to interested and relevant parties in Chile, ensuring that the results can be of benefit to those most impacted by these challenges,” he adds.

The effects of mining for the clean energy transition

Global climate change is understood to be the most pressing environmental issue facing humanity today. Mitigating climate change requires reducing carbon emissions by transitioning away from conventional energy derived from burning fossil fuels, to more sustainable energy sources like solar and wind power. Because copper is an excellent conductor of electricity, it will be a crucial element in the clean energy transition, in which more solar panels, wind turbines, and electric vehicles will be manufactured. “We are going to see a major increase in demand for copper due to the clean energy transition,” says Odell.

In 2021, Chile produced 26 percent of the world’s copper, more than twice as much as any other country, Odell explains. Much of Chile’s mining is concentrated in and around the Atacama Desert — the world’s driest desert. Unfortunately, mining requires large amounts of water for a variety of processes, including controlling dust at the extraction site, cooling machinery, and processing and transporting ore.

Chile is also one of the world’s largest exporters of agricultural products. Farmland is typically situated in the valleys downstream of several mines in the high Andes region, meaning mines get first access to water. This can lead to water conflict between mining operations and agricultural communities. Compounding the problem of mining for greener energy materials to combat climate change, are the very effects of climate change. According to the Chilean government, the country has suffered 13 years of the worst drought in history. While this is detrimental to the mining industry, it is also concerning for those working in agriculture, including the Indigenous Atacameño communities that live closest to the Escondida mine, the largest copper mine in the world. “There was never a lot of water to go around, even before the mine,” Odell says. The addition of Escondida stresses an already strained water system, leaving Atacameño farmers and individuals vulnerable to severe water insecurity.

What’s more, waste from mining, known as tailings, includes minerals and chemicals that can contaminate water in nearby communities if not properly handled and stored. Odell says the secure storage of tailings is a high priority in earthquake-prone Chile. “If an earthquake were to hit and damage a tailings dam, it could mean toxic materials flowing downstream and destroying farms and communities,” he says.

Chile’s treasured glaciers are another piece of the mining, climate change, and agricultural puzzle. Caroline White-Nockleby, a PhD candidate in MIT’s Program in Science, Technology, and Society, is working with Odell and Fernández on the J-WAFS project and leading the research specifically on glaciers. “These may not be the picturesque bright blue glaciers that you might think of, but they are, nonetheless, an important source of water downstream,” says White-Nockleby. She goes on to explain that there are a few different ways that mines can impact glaciers.

In some cases, mining companies have proposed to move or even destroy glaciers to get at the ore beneath. Other impacts include dust from mining that falls on glaciers. White-Nockleby says, “this makes the glaciers a darker color, so, instead of reflecting the sun’s rays away, [the glacier] may absorb the heat and melt faster.” This shows that even when not directly intervening with glaciers, mining activities can cause glacial decline, adding to the threat glaciers already face due to climate change. She also notes that “glaciers are an important water storage facility,” describing how, on an annual cycle, glaciers freeze and melt, allowing runoff that downstream agricultural communities can utilize. If glaciers suddenly melt too quickly, flooding of downstream communities can occur.

Desalination offers a possible, but imperfect, solution

Chile’s extensive coastline makes it uniquely positioned to utilize desalination — the removal of salts from seawater — to address water insecurity. Odell says that “over the last decade or so, there’s been billions of dollars of investments in desalination in Chile.”

As part of his dissertation work at Clark University, Odell found broad optimism in Chile for solving water issues in the mining industry through desalination. Not only was the mining industry committed to building desalination plants, there was also political support, and support from some community members in highland communities near the mines. Yet, despite the optimism and investment, desalinated water was not replacing the use of continental water. He concluded that “desalination can’t solve water conflict if it doesn’t reduce demand for continental water supplies.”

However, after publishing those results, Odell learned that new estimates at the national level showed that desalination operations had begun to replace the use of continental water after 2018. In two case studies that he currently focuses on — the Escondida and Los Pelambres copper mines — the mining companies have expanded their desalination objectives in order to reduce extraction from key continental sources. This seems to be due to a variety of factors. For one thing, in 2022, Chile’s water code was reformed to prioritize human water consumption and environmental protection of water during scarcity and in the allocation of future rights. It also shortened the granting of water rights from “in perpetuity” to 30 years. Under this new code, it is possible that the mining industry may have expanded its desalination efforts because it viewed continental water resources as less secure, Odell surmises.

As part of the J-WAFS project, Odell has found that recent reactions have been mixed when it comes to the rapid increase in the use of desalination. He spent over two months doing fieldwork in Chile by conducting interviews with members of government, industry, and civil society at the Escondida, Los Pelambres, and Andina mining sites, as well as in Chile’s capital city, Santiago. He has spoken to local and national government officials, leaders of fishing unions, representatives of mining and desalination companies, and farmers. He observed that in the communities where the new desalination plants are being built, there have been concerns from community members as to whether they will get access to the desalinated water, or if it will belong solely to the mines.

Interviews at the Escondida and Los Pelambres sites, in which desalination operations are already in place or under construction, indicate acceptance of the presence of desalination plants combined with apprehension about unknown long-term environmental impacts. At a third mining site, Andina, there have been active protests against a desalination project that would supply water to a neighboring mine, Los Bronces. In that community, there has been a blockade of the desalination operation by the fishing federation. “They were blockading that operation for three months because of concerns over what the desalination plant would do to their fishing grounds,” Odell says. And this is where the idea of hydrosocial displacement comes into the picture, he explains. Even though desalination operations are easing tensions with highland agricultural communities, new issues are arising for the communities on the coast. “We can’t just look to desalination to solve our problems if it’s going to create problems somewhere else” Odell advises.

Within the process of hydrosocial displacement, interacting geographical, technical, economic, and political factors constrain the range of responses to address the water conflict. For example, communities that have more political and financial power tend to be better equipped to solve water conflict than less powerful communities. In addition, hydrosocial concerns usually follow the flow of water downstream, from the highlands to coastal regions. Odell says that this raises the need to look at water from a broader perspective.

“We tend to address water concerns one by one and that can, in practice, end up being kind of like whack-a-mole,” says Odell. “When we think of the broader hydrological system, water is very much linked, and we need to look across the watershed. We can’t just be looking at the specific community affected now, but who else is affected downstream, and will be affected in the long term. If we do solve a water issue by moving it somewhere else, like moving a tailings dam somewhere else, or building a desalination plant, resources are needed in the receiving community to respond to that,” suggests Odell.

The company building the desalination plant and the fishing federation ultimately reached an agreement and the desalination operation will be moving forward. But Odell notes, “the protest highlights concern about the impacts of the operation on local livelihoods and environments within the much larger context of industrial pollution in the area.”

The power of communities

The protest by the fishing federation is one example of communities coming together to have their voices heard. Recent proposals by mining companies that would affect glaciers and other water sources used by agriculture communities have led to other protests that resulted in new agreements to protect local water supplies and the withdrawal of some of the mining proposals.

Odell observes that communities have also gone to the courts to raise their concerns. The Atacameño communities, for example, have drawn attention to over-extraction of water resources by the Escondida mine. “Community members are also pursuing education in these topics so that there’s not such a power imbalance between mining companies and local communities,” Odell remarks. This demonstrates the power local communities can have to protect continental water resources.

The political and social landscape of Chile may also be changing in favor of local communities. Beginning with what is now referred to as the Estallido Social (social outburst) over inequality in 2019, Chile has undergone social upheaval that resulted in voters calling for a new constitution. Gabriel Boric, a progressive candidate, whose top priorities include social and environmental issues, was elected president during this period. These trends have brought major attention to issues of economic inequality, environmental harms of mining, and environmental justice, which is putting pressure on the mining industry to make a case for its operations in the country, and to justify the environmental costs of mining.

What happens after the mine dries up?

From his fieldwork interviews, Odell has learned that the development of mines within communities can offer benefits. Mining companies typically invest directly in communities through employment, road construction, and sometimes even by building or investing in schools, stadiums, or health clinics. Indirectly, mines can have spillover effects in the economy since miners might support local restaurants, hotels, or stores. But what happens when the mine closes? As one community member Odell interviewed stated: “When the mine is gone, what are we going to have left besides a big hole in the ground?”

Odell suggests that a multi-pronged approach should be taken to address the future state of water and mining. First, he says we need to have broader conversations about the nature of our consumption and production at domestic and global scales. “Mining is driven indirectly by our consumption of energy and directly by our consumption of everything from our buildings to devices to cars,” Odell states. “We should be looking for ways to moderate our consumption and consume smarter through both policy and practice so that we don’t solve climate change while creating new environmental harms through mining.”

One of the main ways we can do this is by advancing the circular economy by recycling metals already in the system, or even in landfills, to help build our new clean energy infrastructure. Even so, the clean energy transition will still require mining, but according to Odell, that mining can be done better. “Mining companies and government need to do a better job of consulting with communities. We need solid plans and financing for mine closures in place from the beginning of mining operations, so that when the mine dries up, there’s the money needed to secure tailings dams and protect the communities who will be there forever,” Odell concludes.

Overall, it will take an engaged society — from the mining industry to government officials to individuals — to think critically about the role we each play in our quest for a more sustainable planet, and what that might mean for the most vulnerable populations among us.

Dragon’s Dogma 2 And Rise Of The Ronin Reviews | GI Show

Dragon’s Dogma 2 And Rise Of The Ronin Reviews | GI Show

On this week’s episode of The Game Informer Show, we’re joined by special guest Imran Khan to unpack his review of Rise of the Ronin. Friend of the show Jesse Vitelli also drops by to break down his Dragon’s Dogma 2 review. Kyle Hilliard shares his final thoughts on Princess Peach Showtime and gives his hands-on thoughts on the upcoming Hyper Light Breaker. We then round out the discussion with Imran sharing some of the coolest indie games he saw from Day of the Devs and giving our thoughts on our reader-voted Game Gauntlet to decide the greatest game of all time.

Video Version Coming Soon!

Follow us on social media: Marcus Stewart (@MarcusStewart7), Kyle Hilliard (@KyleMHilliard), Charles Harte (@chuckduck365), Imran Khan (@imranzomg), and Jesse Vitelli (@jessevitelli). 

The Game Informer Show is a weekly gaming podcast covering the latest video game news, industry topics, exclusive reveals, and reviews. Join host Alex Van Aken every Thursday to chat about your favorite games – past and present – with Game Informer staff, developers, and special guests from around the industry. Listen on Apple PodcastsSpotify, or your favorite podcast app.

The Game Informer Show – Podcast Timestamps:

00:00:00 – Intro
00:09:22 – Rise of the Ronin
00:29:54 – Hyper Light Breaker
00:39:09 – Day of the Devs
00:54:53 – Dragon’s Dogma 2
01:27:34 – Princess Peach Showtime
01:39:59 – Greatest Game Of All Time Gauntlet
02:12:38 – The Lunch Break: Like A Dance Break but with Lunch (Working Title)
02:15:27 – Pushmo and Dillon’s Rolling Western?